Venhill 10m Workshop DIY Throttle Clutch Cable kit Motorcycle Quad VWK005

Venhill 10m Workshop DIY Throttle Clutch Cable kit Motorcycle Quad VWK005

Venhill 10m Workshop DIY Throttle Clutch Cable kit Motorcycle VWK005

This kit combines the clutch and the throttle kit in handy storage box. Typical application: motorcycle clutch cables, throttle cables and choke cables. Supplied with 10m of conduit, with a black PVC cover, 10m of low friction liner and 10m of inner wire. A range of nipples and high quality fittings are also included. The ferrules and bends are a snug fit on the conduit. They can be bonded in place during the assembly, or crimped / retained with a small centre punch indentation to their side. The fittings can be adapted for a range of models. There are enough fittings in the kit to make at least ten lines (5 clutch and 5 throttle). Additional fittings, conduit and wire can be purchased separately as required. You will need a basic soldering kit to solder the nipples in place. We recommend our ‘bird caging’ tool to make the bond with the nipples stronger prior to soldering. Part no. VT13

Kit Includes:

5mm CONDUIT W/ TEFLON LINER – 10M
7mm CONDUIT W/ TEFLON LINER – 10M
1.5mm O.D. 7 X 7 GALVANISED WIRE ROPE – 10M
2mm O.D. 1 X 19 GALVANISED WIRE STRAND -10M
BARREL NIPPLE 6mm O.D. x 5mm – 10
LOOSE BARREL NIPPLE 8mm O.D. X 9mm -10
BARREL NIPPLE 6mm O.D. x 9.5 mm -10
LOOSE BARREL NIPPLE 10mm O.D x 10mm -10
BARREL NIPPLE 9.5mm x 13mm (3/8in O.D. x 1/2in ) – 10
BALL NIPPLE 5mm O.D. – 25
MIDWAY ADJUSTER. THREAD 32mm LONG – 3
STEEL ADJUSTER M8 X 1.25 X 42mm – 3
ALLOY ADJ SCREW M8 x 1.25 x 25mm – 3
STEEL ADJUSTER SCREW M6 x 1.0 X 32mm – 3
WIRE & ROPE CUTTER – 1
FERRULE BEND HONDA/THROTTLE OPEN BLACK – 1
FERRULE TUBE 45 DEG BEND – THROTTLE – 2
FERRULE BEND – SUZUKI THROTTLE CLOSE – 1
FERRULE BEND OPEN THROTTLE (TRIUMPH) – 1
WIRE GUIDE – MALE BOTTOM CLOSE – 1
MIDWAY ADJUSTER, THREAD 20mm LONG – 3
FERRULE FOR LB1TS CONDUIT 5.5mm O.D. – 40
FERRULE FOR LB1TS CONDUIT 6.3mm O.D. – 20
FERRULE FOR LB3TS CONDUIT 8mm O.D. – 10
FERRULE FOR LB3TS CONDUIT 6.2mm O.D.NOSE -10
FERRULE FOR LB3TS CONDUIT 7mm O.D. NOSE – 10
CARBURETTOR NIPPLE 3mm O.D. x 3mm – 40
TRUMPET NIPPLE 3.5mm 5.8mm O.D x 9.5mm – 25
TRUMPET NIPPLE 4.4mm 7.9mm O.D.x 12.6mm – 25
TRUMPET NIPPLE 3.5mm 6.3mm O.D x 5.1mm – 25
UNIV. NEOPRENE BOOT 7mm I.D. – 20
NEOPRENE ADJ BOOT UNIVERSAL – 10
NEOPRENE TAPERED BOOT I/D 10 & 4.5mm – 4
LOCK NUT M6 x 1.0mm STAINLESS – 6
LOCK NUT M8 x 1.25mm – 12
FERRULE BEND HONDA – THROTTLE CLOSE – 1
FERRULE BEND SUZUKI THROTTLE OPEN BLACK – 1
FER. BEND THROTTLE CLOSE M10x1 (TRIUMPH) – 1
WIRE GUIDE – FEMALE TOP OPENING – 1
RUBBER BOOT – PUSH/PULL THROTTLE – 1